SubliTrans 3D Printing Pen with LCD Screen for Model Making and 3D Modeling

1. Take out the charging cable, plug it into the socket, and connect to the power supply
2. When the power is turned on, the indicator light of ABS or PLA is on. Press the up and down buttons to select the consumable ABS or PLA
3. After selecting the corresponding material, press the feed button to enter the temperature setting, the temperature indicator is red, which means to enter the preheating state
4. When the display shows about 200 degrees, the indicator light turns green and the preheating is completed.
5. Press and hold the feed button to make the sound of the motor transmission, then cut one end of the prepared consumables flat and insert them into the feed port. The consumables will be automatically sent to the pen head. If the material overflows, the work before drawing is completed. Press and hold the feed button. Can create.
6. The stepless speed button on the right adjusts the output progress
7. Press and hold the "feed button" to create, release the button to stop output.
8. When it is inactive for 2 minutes, the product will automatically enter the sleep mode and strike state. (Note: It is strictly prohibited to touch the pen tip and heating parts during use.)